Heading And Position Data - Raymarine SL72 Owner's Handbook Manual

Chapter 1: Overview
The following are available:
Table 1-1:
Display
SL72 PLUS
SL72RC PLUS
Half -Screen Window Options
• Radar Display, Chart Display: If data is available as a function of the
combined display unit it can be displayed full screen or in a half screen
window.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint (if available on SeaTalk).
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint (if available on SeaTalk).
• Nav Data: This shows nine data boxes, providing navigational data (from
SeaTalk or NMEA) in the units specified in your set up. Note that up to 6 of
these data boxes are also available as a user-selectable group (see
Section 7.3).

Heading and Position Data

Full functionality of the radar/chartplotter is achieved when it is part of an
integrated system with other equipmentconnected via SeaTalk or
NMEA 0183. Data from this equipment including position and heading is
shown on the display and is used in calculations.
Details on connecting other equipment are given in Chapter 8.
Operating Modes and Window Options
Full-screen mode
Radar
Radar Mode
Chart Mode
Data Log Mode
Half-screen Window Options
CDI, BDI or Nav Data
CDI, BDI, Chart or Nav Data
CDI, BDI, Radar or Nav Data
Windows not available
1-5