Chapter 2: Using The Tiller Pilot; Overview - Raymarine ST1000+ Owner's Handbook Manual

Chapter 2: Using the Tiller Pilot

Chapter 2: Using the Tiller Pilot

2.1 Overview

WARNING:
Passage making under autopilot control is an enjoyable
experience that can, if you are not careful, lead to the relaxation
of the permanent watch. Always maintain a permanent watch no
matter how clear the sea may appear to be.
• The tiller pilot always powers up in Standby mode (indicated by a flashing 'C'
alongside the boat's current compass heading).
• The tiller pilot is controlled using simple push-button operations, all of which
are confirmed with a short beep. In addition to the main single key functions,
there are several dual key operations.
• To select automatic steering:
• steady the boat on the required heading
• place the pushrod over the tiller pin (if necessary, extend or retract the
• press auto : the display will then show an ' A ' alongside the current head-
• To return to manual steering at any time:
• press standby
• remove the pushrod from the tiller pin
• You can use the -1 , +1 , -10 , and +10 keys to make course changes when the
boat is under autopilot control.
pushrod using the -1 , +1 , -10 , and +10 keys)
ing
7
D355-2