Raymarine Raychart 425 Owner's Handbook Manual page 81

4-12
2. Using vertical trackpad movements, select SD MODE .
3. Use horizontal trackpad movements to toggle between ENABLED and
4. Use vertical trackpad movements to select SATELLITE SELECT and use
Note: The SIGNAL STRENGTH , AZIMUTH and ELEVATION fields are deter-
mined by information from the SD satellite.
5. Press ENTER to select the new SD Satellite settings and return to the
SD GPS SET UP
Figure 4-8: SD GPS SET UP Menu
DISABLED .
• Select ENABLED to allow the unit to use SD corrections if available.
• Select DISABLED to force the unit to calculate a normal GPS fix
with no satellite GPS corrections.
horizontal trackpad movements to toggle between AUTO and MAN-
UAL .
• Select AUTO to instruct the unit to select the SD satellite automati-
cally.
• Select MANUAL to force the unit to use the SD satellite selected.
GPS STATUS window, then press CLEAR again to return to the Setup
functions.
Raychart 425 Chartplotter
D4996_2