Selecting A Waypoint - Raymarine Raychart 425 Owner's Handbook Manual

3-4

Selecting a Waypoint

Positioning the cursor over a waypoint selects that waypoint and accesses
the WAYPOINT OPTIONS function bar. This enables you to GOTO
(described in Section 3.4), edit (symbol, name, position), erase or move
the waypoint.
Selecting a waypoint from the Waypoint List allows you to GOTO and edit
(symbol, name, position, erase) the waypoint. The Waypoint List also
provides options to make a new waypoint and transfer waypoints.
➤
To select a waypoint using the cursor:
1. Move the cursor over the waypoint; the WAYPOINT OPTIONS function
2. Press ENTER to select the waypoint function bar (Figure 3-6):
The selected waypoint can be edited via these functions.
➤
To select a waypoint using the Waypoint List:
1. Press ENTER to display the primary function bar (Figure 3-7):
2. Select WAYPOINTS and press ENTER to display the waypoint function
3. Select WAYPOINT LIST and press ENTER to display the Waypoint List.
bar, together with help text, is displayed (Figure 3-5):
Figure 3-5: Waypoint Options
Figure 3-6: Waypoint Function Bar
Figure 3-7: Primary Function Bar
bar (Figure 3-8):
Figure 3-8: Waypoint Function Bar
The Waypoint List and associated function bar are displayed (see
Figure 3-4).
Raychart 425 Chartplotter