Follow A Route; Reverse A Route - Raymarine Raychart 425 Owner's Handbook Manual

Chapter 3: Operation
3. Select MORE to return to the first level functions.
4. Press CLEAR to return to the chart screen.
Note: The functions differ if a FOLLOW or GOTO is already in progress
(see Stop Follow or Stop Goto on page 3-23).

Follow a Route

Note: If a route has been reversed or if a route on screen was being fol-
lowed, but stopped before completion, the target waypoint (outlined by a
square box) may be different to when the route was created. The target
waypoint should always be checked before initiating a FOLLOW ROUTE .
➤
To follow the current route:
1. Press the GOTO key. The Goto/Follow functions are displayed. Alter-
2. Select FOLLOW ROUTE .
The vessel's current position becomes the origin and the first waypoint in
the current route becomes the target waypoint. A dotted line connects the
vessel's current position to the target waypoint. This line remains fixed
on screen as the vessel moves. The function bar is removed.

Reverse a Route

This option enables a return route to be generated from an existing route
which is then followed in reverse order, with waypoints renumbered
accordingly.
➤
To reverse the current route:
From the normal chart display either:
1. Press ENTER to display the primary function bar, then select ROUTES ,
or
2. Move the cursor over a route leg or waypoint until the ROUTE
The current route is reversed on the screen and the waypoints are
renumbered.
Figure 3-28: Second Level GOTO Functions
natively, place the cursor over a route leg until the Route functions are
displayed.
followed by MORE , then REVERSE ROUTE .
OPTIONS function is displayed. Press ENTER to display the options
and select REVERSE ROUTE .
3-17