Raymarine Raychart 425 Owner's Handbook Manual page 56

Chapter 3: Operation
When the Time/Date screen is first opened, the data relates to the current
day, unless there is no date information available. In this case the last date
is used. The vessel's current position is used unless there is no GPS fix in
which case the cursor position is used and shown as a USER SELECTED
position.
The position data can be either as selected by you, in which case the text
relating to the position is USER SELECTED , or the current position in which
case the text is VESSEL .
The (c) indicator only appears when the position has been user calibrated.
The Time and Date fields show the local current time and date.
The TTG and ETA (WAYPOINT) data relates to the target waypoint. The TTG
and ETA (ROUTE) data relates to the end of the route.
All data is based on the SOG towards the current target. If the SOG is
negative, or data is not available, these fields are replaced with dashes,
one per character.
➤
To display Sunrise/Sunset information for a different date:
1. If the Set Up functions are displayed, press CLEAR to remove them;
2. Select PREVIOUS DAY or NEXT DAY as required to display Sun-
3. Select TODAY to return the display to current date.
➤
To set the position data manually:
1. Display the Position functions as described for Sunrise/Sunset dis-
2. Select SET POSITION then either:
press ENTER to display the position functions (Figure 3-45).
Figure 3-45: Position Functions
rise/Sunset information for a particular date.
play above (Figure 3-45).
i. VESSEL POSITION which sets the position to the current position of
the vessel, or
ii. SELECT POSITION which enables specific Latitude/Longitude data
to be entered.
Use cursor left/right to select individual characters to edit.
Use cursor up/down to select the required character.
iii.Press ENTER to complete, or CLEAR to abort, the change(s).
3-29