Ricoh PT3 Field Service Manual page 35

17. Load a stack of paper on the paper table.
18. Shift the lock lever [G] in the direction of the arrow. Make sure that the side plates [H] touch the paper
gently.
19. Shift the lock lever [G] to its original position.
• Two side fence friction pads [I] are included as accessories. They are not used normally, but if
paper multi-feed frequently occurs or thin paper is used, the side fence friction pads [I] can be
installed to apply stopping pressure to the paper.
20. Raise the paper delivery table slightly, then gently lower it.
21. Lift the side plates and the end plate, and attach the side plate guides [J] for both side plates.
Installation Procedure
2
33