Ricoh PT3 Field Service Manual page 168

6. Appendix: Service Program Mode Tables
No.
80 Auto off at unusual voltage
95 Paper table standby position
100 Make master without print
SP2-6: Image Position Display
When the user moves the image position on the operation panel, this SP controls the length of time that the
adjustment value is shown on the display before the screen goes back to the previous display.
"Slow" means that the display is shown for the longest time possible.
SP2-33: Re-Feeding Setting
When the machine performs re-feeding, the paper registration position can be up to 5mm out of range. If
this incorrect position is not acceptable to the customer, change this SP mode to "OFF".
6
ON: Re- feeding is on (factory setting).
OFF: Re- feeding is off.
SP2-34: Proof Print Adjustment
This enables or disables the proof print adjustment mode (default: Off). The proof print adjustment mode
is designed to compensate for the low image density of the first few sheets. If the proof print adjustment is
enabled, the machine prints several sheets of paper, which can be adjusted by SP2-35, at 30 cpm.
• Off: No proof print adjustment
• On: The machine prints the first few sheets (up to 5) at 30 cpm.
For example:
Default setting (SP2-34: Off)
Number of sheets
Speed (cpm)
Proof print mode enabled (SP2-34: ON)
Number of sheets
Speed (cpm)
30
Menu Items
Idling
80
1
30
Default
On Off/On
Low High / Low
Off Off/On
1 2 3
100 100 100
Setting of SP2-35: "1"
Idling 2 3
80 100 100
Settings
4 5
100 100
4 5
100 100