Ricoh PT3 Field Service Manual page 118

4. Replacement and Adjustment
[A]: Vacuum fan motor bracket ( x 4)
[B]: Vacuum fan motor ( x 2, pin x 2)
[C]: Paper exit sensor (
• Make sure that you install the vacuum fan [B] the correct way around.
4
[D]: Delivery belts ( x 1)
[E]: Paper delivery unit bushings
• Install the delivery belt [D] the correct way around. The writing must be on the outside surface of the
belt.
• The flat part of the "D" shaped cutout in the shaft [F] must face upwards.
116
x 1)