Raymarine ST5000+ Owner's Handbook Manual page 87

74
Position information not received
• Navigator not transmitting the correct position data.
The autopilot will not auto advance to the next waypoint
• No bearing to waypoint information received from the navigator.
A series of rotating dashes are displayed on screen
• Compass deviation correction is running.
The display shows a series of stationary dashes
• Data is not being received – check the cabling.
The display shows "NO DATA"
• The signals received from the navigator are too weak – refer to the
• Wind trim data is not available – check the connection to the wind
navigator handbook for further action.
transducer.
ST5000 Plus SailPilot Owner's Handbook