65
Chapter 6: Post Installation Procedures
What if I turn the boat too quickly?
If you turn the boat too quickly for the compass to be corrected
correctly, the text TOO FAST will be displayed. Apply less helm to
turn in a larger circle.
D3452-1
Can I cancel the process?
You can abort the correction process by pressing the disp key to
move on to the DEVIATION screen.
If you wish to attempt deviation correction again, you can step
back to the Swing Compass page or keep pressing disp to cycle
through the calibration options until the page is displayed again.
(To step back to the previous screen, press and hold the disp key
for one second. You can only do this within two seconds of
advancing to the current screen.) Repeat the procedure from step 4.
6. Keep turning your boat until the unit beeps and the DEVIATION
screen is displayed.