Chapter 7: Post Installation Procedures
1. Make sure that the autopilot is in Standby mode with the drive unit
2. Press and hold the STANDBY key for 2 seconds to display the User
3. Press the
4. Press the +1 or -1 key to change the setting from OFF to YES. The
To perform the deviation correction:
engaged.
Setup entry page.
Entering Setup
Normal Operation
STDBY
If "CAL LOCK" is displayed, you need to turn off the lock feature
contained in Dealer Setup (see Chapter 5).
key to move on to the Swing Compass page.
Compass Deviation
SWING
SWING
Turn Boat page is then displayed after 1 second.
Compass Deviation
TURN
BOAT
Setup Screen
stdby
COMP
ASS
TURN
TURN
BOAT
BOAT
SETUP
TURN
BOAT
65