Chapter 6: Installation - Raymarine ST600R Owner's Handbook Manual

Chapter 6: Installation

Chapter 6: Installation
The ST600R remote unit is connected directly to Raymarine
autopilots or instruments using the Raymarine data interface system
(SeaTalk bus).
The ST600R is supplied with a waterproof plug and socket (deck
connector) that can be installed anywhere a remote is required. The
deck connector allows you to make connections directly to the
autopilot, or any SeaTalk instrumentation, and can be connected in-
line or as a spur (see below).
- - 1 +1
- - 10 +10
stdby auto
track
51
D3201-1