Notes On The Documentation; Observing Other Applicable Documents; Storing Documents; Validity Of The Instructions - Vaillant ecoFIT sustain 615 Installation And Maintenance Instructions Manual

Hide thumbs Also See for ecoFIT sustain 615:
Table of Contents

Advertisement

2 Notes on the documentation

2
Notes on the documentation
2.1

Observing other applicable documents

You must observe all the operating and installation in-
structions included with the system components.
2.2

Storing documents

Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3

Validity of the instructions

These instructions apply only to:
Product article number
Article number
VU 156/6-3 (H-GB)
0010025271
ecoFIT sustain 615
VU 186/6-3 (H-GB)
0010025272
ecoFIT sustain 618
VU 306/6-3 (H-GB)
0010025273
ecoFIT sustain 630
2.4

Benchmark

Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer's instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
6
3
3.1
The boilers are very high efficiency appliances.
As a consequence the heat loss from the appliance casing
during operation is very low.
Compartment ventilation is not required as the products are
only certified, and can only be fitted with a concentric flue
system.
3.2
The data plate is mounted on the underside of the product at
the factory.
The data plate keeps record of the country in which the
Gas Council
product is to be installed.
Number
41-694-30
Information on the
data plate
41-694-31
41-694-32
Serial number
ecoFIT sustain
2H, G20 – 2 kPa (20
mbar)
Cat.
Condensing techno-
logy
Type: Xx3(x)
PMS
PMW
V/Hz
W
IP
Pn
Pnc
P
Qn
Qnw
T
max.
NOx
Code (DSN)
Installation and maintenance instructions ecoFIT sustain 0020277252_00

Product description

Compartment Ventilation

Information on the data plate

Meaning
Barcode with serial number
For quality control purposes; 3rd and 4th
digits = year of production
For quality control purposes; 5th and 6th
digits = week of production
For identification purposes; 7th to 16th
digits = product article number
For quality control purposes; 17th to 20th
digits = place of manufacture
Product designation
Factory setting for gas type and gas
connection pressure
Unit category
Efficiency class of the boiler in accord-
ance with EC Directive 92/42/EEC
Permissible flue gas connections
Maximum water pressure in heating
mode
Maximum water pressure in domestic hot
water mode
Electric connection
Max. electrical power consumption
IP rating
Heating mode
Domestic hot water generation
Nominal heat output range in heating
mode
Nominal heat output range in heating
mode (condensing technology)
Nominal heat output range in domestic
hot water mode
Nominal heat input range in heating
mode
Nominal heat input range in domestic hot
water mode
Max. flow temperature
NOx class for the product
Specific product code

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents