Rangemaster Toledo 90 Dual Fuel User Manual page 33

WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
23. To Remove Fan Oven Element.
Disconnect from electricity supply.
Pull cooker forward to gain access to the rear. Remove
screws securing the electric cover to the back sheet and
remove cover.
Disconnect the 3 terminals connected to the element
noting their position. Remove oven inner back (see 15).
Remove 2 screws from the top of the element and 1
from the bottom of the element in side the oven. Lift out
carefully, refi t new element, reassemble in reverse order.
Check operation of oven.
24. To Remove Grill Element.
Disconnect from electricity supply.
Remove grill pan from grill chamber. From inside grill
compartment remove enamelled front shield from
grill roof, 2 screws and washers. Remove 2 screws
and washers securing the grill element front support.
Remove the screws from the grill elements.
Lift elements out carefully, disconnect the leads from
the element terminals noting their position. If it is not
possible to disconnect the leads in this way, pull cooker
forward to gain access to the rear, remove screws
securing the electric cover to the back sheet and
remove cover and disconnect the terminals from the
rear.
Fit new elements, reassemble in reverse order. Check
operation of grill.
25. To change Main oven light bulb.
Disconnect from electricity supply.
Remove the oven inner back (see 15). The oven light
cover is now accessible. Unscrew the cover.
Unscrew the bulb.
Fit an Edison screw fi tting 15w 240v lamp, FOR OVENS.
It must be a special bulb, heat resistant to 300°C.
33