Rangemaster Excel 110 Ceramic Users Manual & Installation page 9

Turn the Timer knob to the
( ) position.
Use the Adjusting knob to
set the 'cooking time' you
need.
Turn the Timer knob to the
( ) position. The display
will show the current
time of day plus the 'cook
period' you just set.
Use the Adjusting knob
to set the 'Stop time' you
need.
'Stop Time' shows. AUTO
will show in the display.
Set the oven(s) to the cooking temperature you need
(don't forget to set a function if using the Multi-
function oven).
Turn the Timer knob to the (
When your cooking is finished the beeper sounds.
Turn the Timer knob to the vertical ( ) to return to
manual cooking.
If you are out, don't worry about the beeper going off,
it stops after a while. When you return, turn the Timer
knob to the vertical ( ) to return to manual cooking.
Turn the thermostat to the off position.
AUTO is showing, you want to reset to
manual cooking.
You can cancel any automatic settings by turning the
Timer knob to the vertical manual symbol ( ).
) setting.
AUTO
Clock Special Features - Key Lock
When the key lock is activated, the clock can be
operated as usual but the ovens are locked and will
not come on. This means that your child could select
a cook program but the program will not be activated
and ovens will not switch on.
To activate the key lock
Make sure that the clock is in manual mode and
cancel any active programs.
Turn and hold the Timer
knob to the clock symbol
( ) for about 8 seconds.
'On' will appear on the
display.
Keep holding the Timer
knob turned to the clock
symbol ( ) and turn the
Adjusting knob clockwise
until the key symbol
( ) and 'Of' shows on the
display. Let go of the
knobs
The ovens are now locked.
After a few seconds the
display will revert to show
the time of day and the
key symbol.
To turn off the key lock
Turn and hold the Timer
knob to the clock symbol
( ) for about 8 seconds.
'Of' will appear on the
display.
Keep holding the Timer
knob turned to the clock
symbol ( ) and turn the
Adjusting knob clockwise
until the key symbol
( ) goes out on the display
and 'On' shows. Let go of
the knobs.
9