door and remove 2 screws and washers securing the top
element heat shield. Remove 2 screws and washers from
the top element bracket and withdraw. Fit new element,
reassemble in reverse order. Check operation of oven.
20. To change oven light bulb.
Disconnect from electricity supply.
LH Oven
Remove the oven furniture and side linings.
Remove the oven rear liner.
RH Oven
Remove the oven inner back (see 15). The oven
light cover is now accessible. Unscrew the cover.
Unscrew the bulb.
Fit an Edison screw fitting 15w 240v lamp, FOR OVENS. It
must be a special bulb, heat resistant to 300°C.
32