3. Applications
3.1 Vertical up-flow and Horizontal right-flow
Vertical up-flow and horizontal right-flow configurations are the factory settings on all models.
If return air is to be ducted, install duct flush with floor. Use fireproof resilient gasket 1/8'' to 1/4'' thick
between the ducts, unit and floor. Set unit on floor over opening.
IMPORTANT
Lightly tighten the drain connections so they do not leak.
Using excessive force may cause damage to the drain connections. Torque applied to drain
connections should not exceed 10.ft.lbs.
3.00
1.75
3.96
Figure 3-1 Dimensions for front connection coil
2.70
7
3.00"
1.70"
1.40"
2.36