Trane E4AH5E24A1J30A Installation Manual page 17

Safety Cautions All electric work must be performed by qualified personnel.
BAYHTR16** series is designed and approved to be installed in the AMERISTAR or RUNTRU series
air handlers.
 Check the BAYHTR16** series label to confirm BAYHTR16** series size based on room load under
lowest ambient temperature.
 Inspect all heating elements and whether heater element wires.Contact local distributor immediately
if there is any occurred damage.
Warning
 Disconnect all external power supplies before performing installation and servicing. Turn off
accessory heater power switch if applicable. Failure to do so may cause serious injury.
 BAYHTR16** series must be properly grounded and use copper supply wires.
 Make sure to follow national electric code and local regulations.
When installing it in an enclosed area such as a garage, heater elements should have a minimum

clearance of 18'' from the floor to insure the proper ventilation.
17