11 SERVICE WORK ON THE CHASSIS
11.16
11.17
11.18
54
Removing front fender
V00830-10
Installing front fender
V00831-10
Removing the shock absorber
A00044-10
Preparatory work
–
Remove the start number plate. (
Main work
–
1
Remove screws
.
–
2
Remove screws
. Take off the front fender.
Main work
–
Position front fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Mount and tighten screws
Guideline
Screw, front fender
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach the brake line from the brake line guide.
–
1
Remove screw
and lower the rear wheel with the link fork
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
2
Remove screw
, push splash protector
remove the shock absorber.
p. 53)
1
.
M6
6 Nm (4.4 lbf ft)
2
.
M6
6 Nm (4.4 lbf ft)
p. 53)
p. 44)
3
to the side, and