14 COOLING SYSTEM
96
–
Place an appropriate container under the water pump cover.
–
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Coolant drain plug
–
Position the motorcycle upright.
–
Completely fill the radiator with coolant.
V00832-11
Coolant (
–
Loosen screw
–
Mount and tighten screw
Guideline
Screw, radiator
bleeding
–
Mount radiator cap
Danger
V00870-10
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
–
Check the coolant level. (
1
2
. Take off radiator cap
1
with a new seal ring.
M6
p. 122)
3
until coolant escapes without bubbles.
3
.
M6
2
.
p. 93)
.
8 Nm (5.9 lbf ft)
8 Nm (5.9 lbf ft)