Lubricating The Steering Head Bearing; Removing The Start Number Plate; Installing The Start Number Plate - KTM 85 SX 2023 Owner's Manual

11.13

Lubricating the steering head bearing

11.14

Removing the start number plate

11.15

Installing the start number plate

–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
H02387-01
–
Remove screw
–
Unhook the start number plate from the brake line and remove
it.
V00827-10
–
Attach the start number plate to the brake line.
–
Position the start number plate.
Holding lugs
V00829-10
–
Mount and tighten screw
Guideline
Start number plate
screw
V00828-10
SERVICE WORK ON THE CHASSIS 11
( p. 48)
( p. 49)
1
.
1
engage in the fender.
2
.
M6 4 Nm (3 lbf ft)
53