Installing The Shock Absorber; Removing The Seat; Mounting The Seat - KTM 85 SX 2023 Owner's Manual

11.19

Installing the shock absorber

11.20

Removing the seat

11.21

Mounting the seat

Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
A00044-11
Screw, bottom
shock absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
V00836-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
V00837-01
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V00836-10
SERVICE WORK ON THE CHASSIS 11
1
to the side and position the shock
2
.
M12 60 Nm (44.3 lbf ft)
3
.
M12 60 Nm (44.3 lbf ft)
1
.
1
of the seat fixing.
M6 10 Nm (7.4 lbf ft)
Loctite ® 2701™
Loctite ® 2701™
p. 44)
55