Table of Contents
Advertisement
Installation manual
17
5 Marine installation
To ensure steadiness of the machine it is important to fasten the machine to the foundation.
Fasten four fittings to the foundation using four x M10 set screws.
Note!
The four fittings are not supplied with the machine and must be ordered as kit No. 487193544.
Fasten the machine to the fittings.
675 mm / 26 9/16 inch
M10
585 mm / 23 1/32 inch
M10
20Nm
M10
M10
M10
fig.6322
Note!
Marine installation is not applicable for gas heated machines.
Advertisement
Table of Contents
