Table of Contents
Advertisement
Installation manual
33
8.5.2
Central payment (2J)
The central payment or booking system shall transmit an active (high) signal to the machine once permission has
been granted to start the machine. The signal must remain active (high) during drying. When the signal gets inactive
(low) the machine will abort ongoing program and enter cooling. The signal can be either 230V or 24V. In order to re-
ceive a feedback signal once the machine has started, 230V or 24V must be connected to connection 19. The feed-
back signal remains active (high) during the entire program.
fig.7439
Advertisement
Table of Contents
