Table of Contents
Advertisement
Installation manual
25
• If converting to LPG, also mount the air reducing plate (A).
A
fig.7535A
• Loosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring branch.
• Connect the power to the machine and select a program with heat.
• Start the machine.
• Set the correct nozzle pressure according to the table on setting screw (4) under the cover screw (3).
fig.7120
• Check that the gas flame burns evenly.
• Mount the cover screw (3).
• Tighten the screw (2) when the adjustments are done.
• Remount the back panel.
Note!
After connection all joints must be checked. There must not be any leaks.
Advertisement
Table of Contents
