Table of Contents
Advertisement
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
F00063-10
F00064-10
100397-10
https://www.motorcycle-manual.com/
(FC 450)
–
Move the brake fluid reservoir mounted on the handlebar
to a horizontal position.
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
Manually press the brake caliper toward the brake disc
to push back the brake pistons. Ensure that brake fluid
does not flow out of the brake fluid reservoir, if necessary
extract excess.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
–
Remove the cotter pins
the brake linings.
–
Clean the brake caliper and brake caliper support.
–
Check that leaf spring
7
plate
in the brake caliper support are seated correctly.
BRAKE SYSTEM 12
3
.
4
5
, pull out pin
, and remove
6
in the brake caliper and sliding
89
Advertisement
Table of Contents
