Husqvarna FC 450 2019 Owner's Manual page 64

11 SERVICE WORK ON THE CHASSIS
62
(FC 450)
K01098-01
(FX 450)
V01351-10
–
–
S01927-10
–
–
–
–
V01317-11
https://www.motorcycle-manual.com/
–
Position the foot brake cylinder.
4
The push rod engages in the foot brake cylinder.
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws, M6
chassis
–
Position the foot brake cylinder.
4
The push rod engages in the foot brake cylinder.
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws, M6
chassis
Position the angle lever and linkage lever.
6
Mount and tighten fitting
Guideline
Nut, linkage lever on M14x1.5
angle lever
Info
Pay attention to flat area
7
Mount and tighten screw
Guideline
Screw, bottom M10
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
Attach frame protector in area
8
Mount and tighten screws
Guideline
Screw, frame pro- M5
tector
Mount the new cable ties.
5
.
10 Nm (7.4 lbf ft)
5
.
10 Nm (7.4 lbf ft)
.
60 Nm (44.3 lbf ft)
B
.
.
60 Nm (44.3 lbf ft)
®
Loctite 2701™
C
and position.
with the washers.
3 Nm (2.2 lbf ft)