Husqvarna FC 450 2019 Owner's Manual page 75

SERVICE WORK ON THE CHASSIS 11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01085-11
–
Plug in connector
–
Remove the wash cap set and thoroughly clean the plug-
in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into
the fuel line. Dirt in the fuel line clogs the injection
valve!
–
K01084-11
Lubricate the O-ring and connect plug-in connection
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(FX 450)
–
Attach the hose to the fuel tank breather on the tank lid.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V01354-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01085-11
https://www.motorcycle-manual.com/
2
.
M6 10 Nm (7.4 lbf ft)
3
for the fuel pump.
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
4
73