Faults
Engine overheats
Malfunction indicator lamp
lights up or flashes
High oil consumption
Battery is discharged
Possible cause
Foam formation in cooling sys-
tem
Bent radiator hose
Defect in the fuel injection sys-
tem
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscos-
ity)
Piston or cylinder worn
Battery is not charging
Unwanted power consumer
https://www.motorcycle-manual.com/
TROUBLESHOOTING 20
Action
–
Drain the coolant.
(
p. 113)
–
Refill with coolant.
(
–
Change the radiator hose.
–
Check the cabling for damage and
the electrical plug-in connections for
corrosion and damage.
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and oil filter and
clean the oil screens.
(
–
Measure the piston/cylinder mounting
clearance.
–
Check the charging voltage.
–
Check the stator winding of the alter-
nator.
–
Check the open-circuit current.
p. 113)
p. 124)
p. 124)
133