Chamberlain ELITE EL2000LG Programming Manual page 70

Direct Commands from Your Phone (continued):
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Get Door Status:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
Press
1
direct command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Release Door:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
Press
1
direct command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Enable/Disable Call Forwarding For Residence:
ABC
1 2
Press
Press
1
direct command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Enable/Disable Do Not Disturb For Residence:
ABC
1 2
Press
NOTE: For Steps 125 and 126 a valid time zone must be in place in order for their commands to
function.
123 124 125 126
from the residence phone. The unit is now prepared to accept a direct
Hear the status for a specified door. The status
is open when the door is currently latched open
DEF
then or in the unlock portion of an automatic time
zone. The status is closed for all other times.
from the residence phone. The unit is now prepared to accept a
Cancels command set by Step 122 and returns
to previous schedule (if applicable). NOTE: A
GHI
then
Call Forwarding phone number and time zone
must be in place in order for this to function.
from the residence phone. The unit is now prepared to accept a
JKL
5
then enable
from the residence phone. The unit is now prepared to accept a
MNO
6
then enable
Page 69
. NOTE: If no door is selected
. NOTE: If no door is selected
or disable then
or disable then