Directory Codes; About Directory Codes - Chamberlain ELITE EL2000LG Programming Manual

Directory Codes are unique 1-4 digit codes that dial a corresponding
telephone number in the building. When a visitor wishes to contact a
resident, the visitor enters the Directory Code on the unit's keypad. The
unit will dial the phone number assigned to the code. The resident can
then talk to the visitor by phone and grant them entry into the building.
To Use an Existing Directory Code to Contact a Resident:
Enter the Directory Code on the unit's keypad then press
Building Directory
Directory
Name Code
Floyd A. D. 01
Gates H. B. 02
Lyle A. T. 03
Monroe S. Y. 04
Priest J. A. 05
Warren B. K. 06
Visitor uses Directory Code to contact Resident
Before adding or modifying Directory Codes, answer the following questions:
• Have you chosen the Directory Code number you will assign? This number will be assigned to a resident. The visitor
will enter this number on the unit keypad to prompt the system to dial the resident's phone number.
• Do you know the resident's phone number? The system needs the phone number so it can dial the resident when
prompted. If the resident's phone has an extension, the unit will need that data as well.
• Will the resident want a Do Not Disturb schedule? If the resident doesn't want to be disturbed during certain times,
you can configure his/her Directory Code with a Do Not Disturb schedule. During this schedule, visitors won't be able
to call the resident. See page 31.
• Will the resident utilize a Call Forwarding number during certain times? Perhaps the manager of an apartment
complex wants the leasing office phone number forwarded to an answering service after 5PM on weekdays and all
day on weekends. See page 31 for more information.
• Will you activate or deactivate the Directory Code at a certain day and time? You may assign a Directory Code to a
resident and delay its use until a day and time you specify. Also you can deactivate the Directory Code on a specified
day and time. See page 32.
• For units with an LCD display, you can control how the tenant's name is displayed on the screen. See
page 33.

Directory Codes

About Directory Codes

Resident can grant access to Visitor
Page 28
Visitor gains entry