Changing Brake Light Bulb - Volvo XC40 2019 Owner's Manual

4. Undo the grey bulb holder by turning it
anticlockwise and pulling it out.
5. Remove the bulb by pressing it in and
turning anticlockwise.
6. Fit a new bulb by pressing it in and turning
it clockwise.
7. Attach the bulb holder by turning it clock-
wise.
8. Fit the supporting bridge with associated
spring bolt and make sure that the clips
align in the correct position. Tighten the
spring bolt until it stops, max. 2 Nm (1.5 ft
lbs).
9. Move back the insulation and then hook in
the panel and press it back into place.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Related information
Exterior lamp positions (p. 603)
•
Bulb specifications (p. 607)
•
Bulb replacement (p. 603)
•
MAINTENANCE AND SERVICE

Changing brake light bulb

Bulbs for brake lights are located behind the
panel in the side of the cargo area.
1. Press in the panel hatch at the upper edge
to detach it.
2. Move the insulation aside to access the
brake light bulb.
}}
605