Table of Contents
Advertisement
WINDOWS, GLASS AND MIRRORS
||
IMPORTANT
Avoid activating the washer system when
it is frozen or the washer reservoir is
empty, otherwise there is a risk of damag-
ing the pump.
Headlamp washing*
To save fluid, the headlamps are washed auto-
matically at a defined interval when the head-
lamps are switched on.
Reduced washing
If only approx. 1 litre (1 qt) of washer fluid
remains in the reservoir and the message
Washer fluid Level low, refill
the
symbol, is shown in the driver dis-
play, then the supply of washer fluid to the
headlamps is switched off. This is to prioritise
cleaning the windscreen and the visibility
through it. The headlamps are only washed if
main or dipped beam is switched on.
Related information
Using the rain sensor (p. 168)
•
Using automatic rear windscreen wiping
•
when reversing (p. 171)
Wiper blades and washer fluid (p. 166)
•
Using the rain sensor's memory function
•
(p. 169)
Using the rear window wiper and washer
•
(p. 170)
170
Filling washer fluid (p. 624)
•
Set the wiper blades in service position
•
(p. 623)
Replacing windscreen wiper blades
•
(p. 622)
Replacing the wiper blade, rear window
•
(p. 621)
Using windscreen wipers (p. 167)
•
, together with
Using the rear window wiper and
washer
The rear windscreen washer and wiper are
designed to clean the rear window. Washing/
wiping is started and settings are changed by
means of the right-hand steering wheel stalk
switch.
Activating the rear window wiper and
washer
NOTE
The rear window wiper motor is equipped
with overheating protection which means
that it is switched off if it overheats. The
rear window wiper works again after a
cooling-down period.
* Option/accessory.
Advertisement
Chapters
Table of Contents
