Volvo XC40 2019 Owner's Manual page 409

Symbols in the driver display
Symbol Specification
If the symbol flashes, it indicates
a fault has occurred. See the
message in the driver display.
Fault in brake system. See the
message in the driver display.
Information message in driver
display.
Related information
Activating and deactivating the parking
•
brake (p. 404)
Parking on a hill (p. 406)
•
Starter battery (p. 585)
•
Volvo service programme (p. 570)
•
Automatic braking when stationary
Automatic brake when stationary (Auto hold)
means that the driver can release the brake
pedal while maintaining braking effect when
the car has stopped at traffic lights or a junc-
tion.
When the car has stopped, the brakes are
activated automatically. The function can use
either foot brake or parking brake to hold the
car stationary and it works on all gradients.
When driving off, the brakes are released
automatically if the driver is wearing the seat-
belt or the driver's door is closed.
NOTE
When braking to a standstill on an uphill or
downhill slope, the brake pedal should be
depressed a little harder before being
released to ensure the car does not roll.
The parking brake is activated if
the car is switched off
•
the driver's door is opened
•
the driver's seatbelt is unbuckled
•
the car has been stationary for a longer
•
time (5-10 minutes).
STARTING AND DRIVING
Symbols in the driver display
Symbol Specification
The symbol is illuminated when
the function uses the foot brake
to keep the car stationary.
The symbol is illuminated when
the function uses the parking
brake to keep the car stationary.
Related information
Activating and deactivating the automatic
•
brake at a standstill (p. 408)
Foot brake (p. 401)
•
Parking brake (p. 404)
•
Help when starting on a hill (p. 408)
•
407