Volvo XC40 2019 Owner's Manual page 579

4. Position the jack or the lift arms at the
designated spots of the car's undercar-
riage. The triangle markings in the plastic
cover indicate the locations of the jacking/
lifting points. There are two jacking points
on each side of the car. There is a recess
for the jack at each point.
5. Position the jack on level, firm and non-
slippery ground under the jacking point
that will be used.
6. Crank up until it is correctly aligned and so
that it makes contact with the car's jack-
ing point. Check that the head of the jack
(or lifting arms at a workshop) is correctly
positioned in the jacking point so that the
bump in the centre of the head fits into the
jacking point hole, and check that the
base of the jack is positioned vertically
below the jacking point.
7. Turn the jack so that the crank is as far
away from the side of the car as possible,
at which point the jack's arms are perpen-
dicular to the direction of the car.
8. Raise the car high enough to perform the
intended measure.
Related information
Jack* (p. 540)
•
Wheel bolts (p. 540)
•
Tool kit (p. 539)
•
MAINTENANCE AND SERVICE
* Option/accessory.
577