Optional Air Filters; Ac Psus And Supplying Ac Power To The Chassis - Fortinet FortiGate-7030E System Manual

FortiGate-7030E chassis
FortiGate-7030E cooling air flow and minimum air flow clearance (chassis side view)
Front
100 mm
Cool air
Intake
50 mm Clearance

Optional air filters

You can purchase an optional NEBS compliant air filter kit that includes a front filter that fits over the front of the chassis
and two filters for the side cool air intakes. These filters are not required for normal operation but can be added if you
require air filtration.
The air filters should be inspected regularly. If dirty or damaged, the filters should be disposed of and replaced. The air
filters can be fragile and should be handled carefully.

AC PSUs and supplying AC power to the chassis

The FortiGate-7030E chassis back panel includes three hot swappable AC or DC power supply units (PSUs). At least
two PSUs (PWR1 and PWR2) must be connected to power. PWR4 is a backup power supply and provides 2+1
redundancy. You can add a fourth power supply to PWR3 to provide a second backup power supply and 2+2
redundancy. See FortiGate-7030E back panel on page 8
All PSUs should be connected to AC power. To improve redundancy you can connect each power supply to a separate
power source.
Use a C15 Power cable, supplied with the chassis, to connect power to each PSU C16 power connector. C15/C16 power
connectors are used for high temperature environments and are rated up to 120°C.
FortiGate-7030E 6.2.3 System Guide
Left and Right
Side Cool Air
Intakes
(Optional)
650 mm
for locations of the PSUs.
Fortinet Technologies Inc.
100 mm
Fan
Trays
Warm Air
Exhaust
Back
13