Fortinet FortiGate-7030E System Manual page 51

FortiGate-7030E System Management Module
Action
Cold or warm reset a
module.
Run a module self
test.
Power on a module.
Power off a module.
Reset a module.
Power cycle the
chassis
Get chassis sttatus
Display the LAN
configuration.
Available on the
passive module.
Set LAN
configuration. The
kgkey and krkey
options are used for
RCMP+.
Enable or disable all
LAN interfaces.
Set fan levels.
Change or switch the
active fan set.
Change LED
settings.
Display HPM.1
status.
Run an HPM.1
upgrade.
FortiGate-7030E 6.2.3 System Guide
SMC CLI Commands
mc reset <slot> cold
mc reset <slot> warm
N/A
fru activate <slot> [<fruid>]
fru deactivate <slot> [<fruid>]
fru reset <slot> [<fruid>]
N/A
N/A
lan print <channel>
lan set <channel> ipaddr <ip>
[<netmask>]
lan set <channel> macaddr <mac>
lan set <channel> defgw ipaddr
<ip>
lan set <channel> defgw macaddr
<mac>
lan set <channel> kgkey <value>
lan set <channel> krkey <value>
lan enable
lan disable
fan_min_level <0-30>
fan_max_level <0-30>
fan_set_switch
N/A
N/A
N/A
Fortinet Technologies Inc.
IPMI Commands
mc reset cold
mc reset warm
mc selftest
picmg activate
picmg deactivate
picmg reset
chassis power cycle
chassis status
lan set help
(use this command to display online help for
LAN settings)
fortinetoem param set 0 1
fortinetoem param set 0 0
N/A
picmg led set help
(use this command to display online help for
LED settings)
hpm check
hpm upgrade <.img> hpm upgrade
<.img> all activate
51