Spot Out Gui - Clover DV1670 Instruction Manual

Chapter 14. Event Section In-Depth

4. SPOT OUT GUI

This setting enables the monitoring by the second monitor and also provides the display mode such as
Event popup, Sequence, Event + Sequence and Fixed channel.
Set Sequence Dwell Time: Available to set from 0 to 30 seconds
Spot Mode:
• Event : When an event is triggered, the relevant channel video is popped up.
• Sequence : The selected channels are displayed sequentially for the selected dwell time.
• Event+Sequence : While being displayed sequentially at no event, when an event is triggered, the
channels triggered are displayed preferentially.
• Fixed Channel : Display the selected channel only
Figure 128 SPOT Out GUI
4. SPOT OUT GUI
Page
143