Table of Contents
Advertisement
Chapter 9. Systems Section In-Depth
Configuring HDD1 and HDD2
Set the first HDD connected to "HDD1" in the system.
1. Set Main Disk or Mirror Disk.
Main Disk or Mirror Disk option will be available.
Main Disk is used for single disk operation or 2 HDD that will use its maximum volume capacity.
At least HDD1 must be set to Main Disk (Single HDD).
With HDD1 and HDD2 installed both HDD1 and HDD2 must be formatted upon 1st time
operation.
Mirror Disk option must be chosen if HDD 1 is replicated to HDD 2.
When Mirror Disk option is set and has data corruption or HDD failure HDD2 has replicated
information of HDD1.
2. Format: Format the HDD
HDD must be formatted when new disk is introduced.
HDD must be formatted when disk is from different DVR unit.
HDD format is recommended when disk is pulled out and reintroduced to DVR unit.
Page 76
Figure 63 HDD 1 and HDD 2 example
Figure 64 Disk 1 Configuration
2. DISK MANAGER GUI
Advertisement
Table of Contents
