Controller Gui - Clover DV1670 Instruction Manual

Chapter 12. Camera Section In-Depth

3. CONTROLLER GUI

3. CONTROLLER GUI
You can connect a keyboard to operate the DVR. And the joystick control is very convenient to PTZ
control.
Figure 103 Controller GUI
Model: Select the model to connect to the DVR. You should check the compatibility between the
keyboard and DVR before purchasing.
Controller ID: The default value is "0" for the ID. If you want to use different ID, you should change the
keyboard ID too.
Serial port: Use "RS-485" or "RS-232"
Note: Refer to the instruction manual for the detailed keyboard operation.
Page
126