Command and Response Table for SIS Commands (continued)
Command Function
Unit name
Set unit name
Set unit name to factory default
Show unit name
Verbose mode 2 and 3:
Information requests
Request part number
Verbose mode 2 and 3:
Query controller firmware version
Example:
Product Configuration Software
This section details the Extron Product Configuration Software (PCS), available on the
Extron website. The Windows-based PCS communicates with the unit via the front panel
configuration port, a standard USB mini-B port (see
Installing the Software
PCS and Firmware Loader are available on the Extron website. Download and install both
programs as follows:
NOTES:
1.
2 2 2 2
2 2 2 2
2 2
OR
2 2 2 2
2 2
2 2 2 2
DTP T/R DP 4K 330 and DTP T/R DP 4K 230 Twisted Pair Extenders • Remote Control
SIS Command
(Host to Unit)
EX$
}
CN
E •
}
CN
E
}
CN
E
}
CN
N
N
Q
Q
•
This procedural description is illustrated as using Internet Explorer. Depending on
the browser you use, some steps or indications may be different.
•
Steps 1 through 7, below, are also used to download firmware update packages.
Go to
www.extron.com
and click the
3 3 3 3
3 3 3 3
3 3
Figure 10.
Selecting the Download Tab
Response
Additional description
(Unit to Host)
• X$]
Set unit name to
Ipn
•
]
Ipn
DTP-R-DP-4K-230
Unit name depends on model.
•
]
Ipn
DTP-R-DP-4K-330
X$]
• X$]
Ipn
]
See
60-nnnn-nn
numbers.
]
•
Pno
60-nnnn-nn
X& ]
]
The factory-installed controller firmware
1.23
version is 1.23 (sample value only).
item
on page 11).
B
tab (see figure 10,
Download
1 1
1 1 1 1
1 1 1 1
X$
.
www.extron.com
for part
).
1
14