Table of Contents
Advertisement
FOX Extenders
Control Program
The Extron FOX Extenders Control Program provides an alternate method to control
and configure the FOX T UWP 302. The application provides controls to adjust device
parameters and manage firmware. The FOX T UWP 302 can also be configured and
controlled with SIS commands (see
The Extron FOX Extenders Control Program communicates with the transmitter via the
Remote RS-232 port on the rear panel Remote RS-232 and Alarm connector or front panel
USB Config port. The program is compatible with Microsoft
or later Windows operating systems. Updates to this program can be downloaded from the
Extron website (www.extron.com). Topics in this section include:
•
•
•
Installing the Software
The program is available for download on the Extron website.
To download the software from the website:
1.
2.
3.
4.
5.
6.
7.
Installing the Software
Starting the Software
Using the Software
On the Extron website, click the
From the left sidebar, click the
Navigate to
FOX Extenders
Click the
link to the right of the desired device.
Download
Submit any required information to start the download. Note where the file is saved.
Open the executable (.exe) file from the save location.
Follow the instructions that appear on the screen. By default, the installation creates a
folder in the Program Files directory for the FOX Extenders Control Program.
FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program
SIS Configuration and Control
®
tab.
Download
link.
Software
.
on page 15).
Windows
2000, Windows XP,
®
23
Advertisement
Table of Contents
