Fan baffle
The fan baffle sits on top of the fan sink.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Rotate the small baffle upward from atop the fan baffle.
4.
Remove the power cable from the clips on top of the baffle (1).
5.
Remove the hood sensor cable from the clips on top of the baffle (2).
6.
Pull the tabs on each side of the baffle away from each other (3), and then lift the baffle off the fan sink
and out of the computer (4).
To install the fan baffle, reverse the removal procedure.
(Preparation for disassembly on page
(Access panel on page
19).
18).
Fan baffle
49