Table of Contents
Advertisement
CAUTION:
seat the fan sink on the processor to avoid damage that could require replacing the system board.
Failure to install the baffle may cause the computer to overheat.
Processor
Description
AMD A12-9800, 3.8 GHz
AMD A10-9700, 3.5 GHz
AMD A8-9700, 3.5 GHz
AMD A6-9600, 3.1 GHz
AMD A12-8870, 3.7 GHz
AMD A10-8770, 3.5 GHz
AMD A6-8570, 3.5 GHz
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Rotate the drive cage to its upright position.
4.
Rotate the small baffle into the upright position
5.
Remove the fan baffle
6.
Remove the fan sink
7.
Rotate the locking lever to its full open position (1).
58
Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly
(Access panel on page
(Fan baffle on page
(Fan sink on page
(Preparation for disassembly on page
19).
(Small baffle on page
49).
57).
18).
48).
Advertisement
Table of Contents
