Siemens SIPROTEC 5 V7.80 Operation page 121

Procedure
First identify all devices reachable via the PC communication interfaces. You can identify your device via
²
the DIGSI 5 project tree.
Establish a connection to a selected device.
²
If needed, you can assign a selected device to an existing project.
²
Device Identification via the DIGSI 5 Project Tree
Select the utilized PC interface from Online access (a).
²
Click the Update accessible devices button (b).
²
The accessible participants (devices) are displayed to you (c).
[scgerinf-220211-01.tif, 1, en_US]
Figure 8-1
Establishing a Connection to Selected Devices
After device identification, the accessible devices are displayed in the project tree under the respective
communication interfaces of the PC. You can now establish a connection to the devices.
[scwalger-110413-01.tif, 1, en_US]
Figure 8-2
Open the designated device (a) under Online access → Interface.
²
The basic information is displayed below the device.
²
You can find the following tabs in the menu item Device Information:
•
Device information
•
Resource consumption
•
Log for device diagnosis and security
•
Time Information
•
Diagnostic information
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Device Identification via the DIGSI 5 Project Tree
Device Identification via the DIGSI 5 Project Tree
Operation in the Operating State
8.3 Operation Options
121