Table of Contents
Advertisement
NOTE
i
i
For a device to be editable offline, you must first have created it in a project. After successful loading of the
configuration, the device restarts automatically.
Procedure
From the project tree, select the project containing the device to be operated.
²
Select the respective device within the project.
²
Open the device in the project tree.
²
You can now carry out configurations and settings in offline mode.
²
All the corresponding submenus are listed in the project tree under the device name.
[scproans-110413-01.tif, 1, en_US]
Figure 8-4
To establish a connection to the device, right-click the device and from the context menu that appears
²
select Assign device
Select Load Configuration to Device
²
and enter the confirmation ID.
The configuration is transferred and the device restarts automatically after successful transmission.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Offline Operation of the Device
(Figure 8-5
a).
(Figure 8-5
by right-clicking from the context menu that appears b)
Operation in the Operating State
8.3 Operation Options
123
Advertisement
Table of Contents
