Connectable Drive-Cliq Components - Siemens SINUMERIK ONE NCU 1750 Equipment Manual

8.6.2

Connectable DRIVE-CLiQ components

Components
As a rule, all SINAMICS/SIMOTION components approved for SINUMERIK can be connected to an
NCU using DRIVE-CLiQ.
Table 8-7
Component
NX10.3 / 15.3
SINAMICS S120, system components, booksize format
Smart / Active / Basic
Line Module
Single / Double Motor Module Motor Modules draw their power from the DC link to supply the connec‐
HF Motor Module
S120 Combi
Power Modules
SINAMICS S120, system components, chassis format
Smart / Active / Basic Line
Module
Motor Module
SINAMICS S120, additional system components
SMC10 / 20 / 30 / 40
SME20 / 25
SME120 / 125
DMC20/DME20
TM15-2/TM31
TM41
TM120
CUA31
VSM10
NCU 1750
Equipment Manual, 01/2022, A5E45627807B AE
Components with DRIVE-CLiQ
Description
Drive expansion module for up to 6 axes
Line Modules provide the central power supply to the DC link.
ted motors.
Operates as inverter and provides the energy for the
connected motor - High Frequency Drive.
Compact and robust multi-axis Power Module for the machine tool.
Power Modules provide the energy for the connected motor.
Line Modules provide the central power supply to the DC link.
Motor Modules draw their power from the DC link to supply the connec‐
ted motors.
Cabinet-mounted Sensor Modules are used when a motor with a DRIVE-
CLiQ interface is not available and when external encoders are required
in addition to the motor encoder.
Measuring systems outside the control cabinet can be connected directly
to the Sensor Module External.
DRIVE-CLiQ Hub Modules are used to implement star-shaped distribution
of a DRIVE‑CLiQ line.
The number of available digital inputs and outputs within a drive system
can be expanded using a Terminal Module.
The number of available digital inputs and outputs within a drive system
can be expanded using a Terminal Module; an incremental encoder can
also be emulated.
The TM120 Terminal Module is used for temperature evaluation with
protective separation. It can be used for 1FN, 1FW6 and third-party mo‐
tors.
Adapter to connect a Power Module to the NCU.
The VSM10 Voltage Sensing Module is capable of measuring the line
voltage waveform precisely and helps Line Modules to continue func‐
tioning properly under difficult supply conditions, for example, in the
case of extreme voltage fluctuations or brief supply interruptions.
Connecting
8.6 DRIVE-CLiQ components
69