Operator Control And Display Elements; Overview Of Operating And Display Elements - Siemens SINUMERIK ONE NCU 1760 Equipment Manual

Note
Product code scanning
The product code contains the article number of the device. Scan the product code with the aid
of the Siemens Industry Online Support App to be taken directly to the Internet Webpage for the
product, including all of the technical information and graphical data.
The app is available for iPhone, iPad, Android and Windows Phone.
Note
The contents of the individual type plate fields on the actual NCU may differ from those
described in this Manual (e.g. updated product status, approvals and identifications not yet
issued, etc.).
Information about third-party software used
This product contains open source software ("OSS") components that are subject to the GPL/
LGPL licenses and other OSS licenses. The associated OSS component and license
information as well as information about the OSS source code (together "OSS Information") are
stored on the product and can be fetched as follows:
Export on an SD card
1. Insert an SD card formatted with the FAT or ext2/3 file system in the card slot provided at the
front of the device.
2. Boot the NCU.
3. After booting, open the "/siemens/readme-oss" directory.
The OSS information is contained in the "ReadMe_OSS.txt" file.
4. To display the file content, open the file with a text editor, e.g. the Windows "Editor"
application.
3.4

Operator control and display elements

3.4.1

Overview of operating and display elements

Open the service flap by pressing on the area labeled with "Push".
NCU 1760
Equipment Manual, 02/2020, A5E45627861B AB
3.4 Operator control and display elements
Description
27