Install The Fan Module; Install The Top Cover On The Node - Dell PowerStore 1000 Installation And Service Manual

Figure 97. Removing the fan from the motherboard

Install the fan module

Steps
1. Place the fan module into the mounting position in the node.
2. Squeeze the blue tabs and press downward to lock the fan module into position.
3. Connect the fan module power cable to the connector on the motherboard.
Figure 98. Installing the fan module

Install the top cover on the node

Steps
1. Position the top cover over the node and align it with the slots in the sides at the rear of the node.
90 Base enclosure service procedures